Moto 360 adapter usb cable

Share if the site was helpful

Motorola Moto 360 adapter usb cable

20140926_220555

How to make your own USB cable to connect to the 5 Pogo pins on the back of the Motorola Moto 360 under the bottom watch band under the FCC sticker. With this cable you will be able to give the Moto 360 adb and fastboot commands. To unlock the bootloader or maybe even restore a bricked device its up to you. Here are the instructions with some pictures to hopefully help you along.

20140926_165415

Tools and parts you will need

1. a long usb cable

2. a female cat5 connector from any of these links Home Depot  Amazon

3. par of wire strippers

4. small side cutters

5. little standard screw driver

6. drill and 1/16 drill bit

7. ohm meter

8. needle nose pliers

Useful info on usb cables

usb cableusbpinout

 Basically what you are doing is cutting the micro usb end off of the usb cable and attaching a Cat5 female connector to the end with 4 of the prongs pulled out to connect to the pins on the back of the Moto 360. best advise is to watch the video i have on this process here.

Please comment below if you have any questions or ideas on improving this cable thanks

RootJunky Out

 

Nvidia Tegra Note 7 Super Tool

Share if the site was helpful

Nvidia Tegra Note 7 Super Tool

Warning use at your own risk. I have tested this on my own EVGA Nvidia Tegra Note 7 on android 4.4.2 and it works great.
I HAVE BEEN TOLD BY SOME THIS DOESN’T WORK ON THE ADVENT VEGA NOTE 7 BUT OTHER SAY IT DOES WORK, SO USE AT YOUR OWN RISK.

tool

 

tool 2

1. adb and fastboot driver install
2. unlock bootloader
3. Restore / unbrick device
4. Flash stock android recovery
5. install ClockWorkMod recovery Bat version
6. Install TeamWin / TWRP recovery
7. Root access in recovery with supersu

this is a pretty easy to use tool just read & follow the steps and it will walk you right through. Hope this is helpful to some noobs out there that dont know how to use android SDK.

How to use the Super Tool Video
Tegra Note 7 Super Tool Video
Updated Video for Version 2.0

Link to my download page where you can find the tool and lots of other great files.

Nvidia Tegra Note 7 Super Tool newest version

NEWEST VERSION 2.5
CHANGE LOG
VERSION 1.2
1. Adjusted the cwm recovery install to boot you to recovery after install
2. Cleaned up script
3. After each option tool will now reboot to menu options again
4. Root option now temp boots recovery to flash Supersu. Keeps you on stock recovery if you want it for ota updates.
5. Fixed a problem with the restore files keeping ota’s from installing right.
VERSION 1.3
1. Added stock recovery flash
2. updated restore files to 4.3 new 7MB ota
3. added a wipe data factory reset or reboot option to the restore process
4. cleaned up the script
VERSION 1.4
1. added driver install and test feature
2. added better graphical features
3. cleaned up script
VERSION 1.5
1. fixed CWM recovery flash not working. and stock recovery being restored
2. cleaned up script
VERSION 2.0
1. Updated restore files for KITKAT 4.4.2
2. updated to newest SuperSU.zip for root
VERSION 2.1
1. Added write to SD card fix for kitkat option 7
2. moved driver install and test to option 8
VERSION 2.2
1. updated restore files to new ota 4.4.2-2.1
2. updated supersu.zip to 1.94
3. tested all updated files
VERSION 2.3
1. Updated restore files to New OTA 4.4.2-2.3
2. Updated stock recovery to 4.4.2-2.3
VERSION 2.4
1. Updated restore files to New OTA 4.4.2-2.4
2. Updated stock recovery to 4.4.2-2.4
VERSION 2.4.T
1. Added TWRP Recovery to super tool thanks to shaky156
VERSION 2.4.1
1. updated super tool to 2,4,1 ota
2. updated supersu to version 2.00
3. Updated stock recovery to 2.4.1 ota
4. dont forget the TWRP is now functioning
VERSION 2.5
1. updated to OTA 2.5
2. added new supersu
3. cleaned up script
4. killed adb server on close
HUGE thanks to Matt Groff for helping with all off the files and script.

[wpfilebase tag=browser id=2 /]

 

Wifi Phone

Share if the site was helpful

How to turn your old or new android device into a WiFi phone

Requirements

1.  Phone with Android version 4.3 or higher

2.  Gmail account

3.  Google hangouts app installed

4.  Google Voice app installed

5.  Hangouts dialer app installed

6.  A phone number you can use to setup your Google voice account with but not use. It can be a land line or a cell

7. a WiFi network to have your device connected to. maybe at your home or at McDonalds 🙂

Steps for setup

1. Go to Google.com/voice and login

2. get a new number for your google voice account

3. activate new number be verifying with another number cell phone or lane line.

4. setup voice mail and any other settings you like on the site

5. check forward calls to Google chat this is really import also make sure you verification number isnt checked

voice

6. Now that you have your google voice number setup you can setup the apps on your phone

7. setup google voice app first then open and setup hangouts next hangouts dialer

Screenshot_2014-09-18-21-12-39

8. go to settings on hangouts app and select sms and enable it

Screenshot_2014-09-18-21-12-27

Screenshot_2014-09-18-21-12-02

8. again in settings click on your email address. Then under google voice check both incoming phone calls and messages

Screenshot_2014-09-18-21-11-39

thats it your done

if you did everything right you now have a android phone that when it is on wifi can make and receive phone calls with the google voice number you setup. It can send and receive text also from that google voice number and even get voice mail that can be played in the hangouts app, in fact all the features listed here are done from the hangouts app.

This is a great way to use a old phone or even a phone with a bad esn

No sim card required device can be unactivated

Enjoy my little trick and also what i use for a home phone

RootJunky Out

Sync this phone with a android wear device and you will be really running smooth 🙂

 if you are still having a hard time with this check out this video it the same process just with different apps

en English
X